Using Nail Gun in your home

Using Nail Gun in your Home

Some people say “home is where the heart is” and they are absolutely correct. Your home is where you raise your kids, where you plant your first garden, and where you can (eventually) tear down that hideous kitchen and renovate it. More than 50% of people in the US renovates at least one room in their house. That is a lot of wood, scrapes, but more importantly nails. Taking shortcuts is usually how they accomplish such a feet in a short period of weeks when it normally takes months for a job like that. A shortcut that is most famous (and needed) is using a nail gun. Yes, nail guns aren’t just for carpenters and construction workers, even home owners use them. They are very useful around the house as much as they are outside. Here are a couple of uses for a nail gun around the home.

 

What Is A Nail Gun?

nail-gunA nail gun can go by other names such as a nailgun or nailer. It is a power tool that can be used to drive nails into metal, wood, and some other kinds of material. Nail guns have replaced hammers when it was introduced in 1950. It was designed to help speed up the construction of housing floor, sub-floors, and sheathing. A nail can be driven in (with a nail gun) by compressed air, electromagnetism, flammable gases, or a small explosive charge. When using a nail gun, you use a fastener that is mounted on a long strip or plastic carrier. It then needs to concentrate enough hammering force in a single blow and repeat it fast. It then loads a new nail in to the previous nails spot when it is ejected. It seems simple enough, doesn’t it?

 

Uses For Nail Guns At Home

 

1. Flooring

One of the mail uses of a nail gun is flooring. There actually is a nail gun specifically designed for the purpose, the Flooring Nailer. This nailer cuts out the time of getting on your hands and knees and nailing the floor down. To make the job evening quicker, you should use a flooring nailer that uses air pressure. It is less force which helps with the fatigue of the operator.

 

2. Hanging Up Pictures

One of the more obvious reasons, hanging photos. This is where your life gets so much simpler. Imagine moving into your new home for the first time. There is so much stuff to do and you can’t worry about getting the hammer out and hammering each photo one by one. Well if you have a nail gun it would only take you less than a sec per photo. That’s a 15-minute job cut down to 5 minutes.

 

3. Doors

Yes, I said it, doors. Something that is quite simple and easy to take down can be a pain if it is just you and a hammer and some nails. Normally, we would ask someone to hold the door at a precise position so that we can place the nail where we want it and it doesn’t increase the hole if they so happened to move it. Now you can do it all on your own. Using a framing nailer would be able to do the trick every time.

Tip: There are 5 different types of nail guns: Finisher, Framing, Roofing, Brad, and Flooring Nailers.

 

4. Cabinets

One of my favorite things to change in a kitchen is a cabinet. I usually change them with the seasons to give the room an update all the time. When changing cabinets, you should use a trim nailer. The great thing about this gun is that it helps to prevent splitting due to the fact that you do not need to predrill. Another gun you can use for smaller units is a brad nailer. It allows you to quickly and easily secure thin moldings without ruining them.

 

5. Baseboards

Baseboards are something that everyone ignores when it gets a scratch or a dent. Its ok to ignore them but if you ever want to change them, it’s very easy. You can use a Finishing nailer to do most of the work. When you attach a baseboard, you are basically attaching it to drywall so a finisher nailer would be the best choice.

Tip: Nailers can come cordless or corded. Most cordless nailers have a batter pack that is normally included and some can even be fully charged in 30 minutes or less.

 

6. Crown molding

Crown molding is another house project that requires a nail gun. One that most people prefer is the finish nail gun. It uses a 16’ gauge nail. It is small enough that it can be puttied over the finished product. Installation of crown molding requires precision in measuring, fitting, and cutting. Everything must be correct for the finish project to look stunning.

 

7. Upholstery

I know that I am not the only person who has had a pet tear up their couch. A little rip can turn into an unraveled mess. The best way to stop it (as a quick fix of course) is to use a brad nailer. This nailer is a light duty nailer that uses 18-gauge nails. One of the great things about a brad nailer is that because the head is so small that you would not have to use anything to cover the hole.

Tip: Because the finish nailer uses larger gauged nails, there is a greater risk of splitting, or breaking thin pieces of trim you are trying to install.

 

Conclusion

The nail gun has been around for more than 25 years and we can see how things have progressed as far as its uses. It is not just for carpenters or construction workers anymore. The famous nail gun can be used by the single mother who must fix her upholstery on her furniture. Or the teenage son who has a D.I.Y project due for school. Even your grandfather whom wants to put up a bookshelf. There are many uses for a nail gun around the house. Now go ahead and put your nail gun to the test around your home.

 

Safety Precaution!

Safety is always one of the most important things that you should cross your T’s and dot your I’s with. Especially using a power tool. I am not saying to go into a job thinking that all power tools are dangerous or that you cannot use it because of what “might” happen. Taking extra precaution is something that I recommend always. Nail guns have been designed to not release a nail (fire) unless the pressure tip is first pressed against an object that is not a guarantee that an accident won’t happen. Please be careful always and always wear you’re your protective gear.